Air conditioner without external unit

Normally when you think of an air conditioner, you are used to imagining the presence of both the internal unit, the internal split that we use at home and which has the function of introducing cold air into the environment, and the external unit, a machine consisting of a fan and cooling system to be placed outside the home.

This happens in most cases but in recent years, especially due to the increase in restructuring practices, the use of monobloc air conditioners has made its way, which condense internal and external machines into a single unit that is positioned inside the 'building.

Installing the monobloc air conditioner

In the monobloc air conditioner there is no external unit that is normally positioned on the balcony, facade or roof and this guarantees an excellent aesthetic result even in historic centers and in areas under the supervision of the superintendency.

Even without the presence of the outdoor unit, a heat exchange is necessary so that the air conditioner, which in the case of the monobloc also works as a motor, can generate hot or cold air as needed.

To make up for the lack of the external unit, it is necessary to drill two holes on the external wall which respectively allow the intake of air towards the inside and the expulsion of heat towards the outside (in the case of cooling).

It goes without saying that the monobloc air conditioner must necessarily be installed on a perimeter wall and not on an internal wall.

The holes will not be visible inside the house because they are made directly behind the internal split and also externally the result is decidedly sober and aesthetic.

When it is convenient to install an air conditioner without an outdoor unit

Although much less common than a normal split air conditioner, the monobloc air conditioner in some cases is the only possible solution.

For example, the air conditioner without external unit is an excellent ally when the condominium regulation prevents the installation of an external unit on the facade, or in the presence of architectural or urban planning constraints, such as for homes in the historic center or in high artistic or environmental value.

Furthermore, the installation of a monobloc air conditioner without external unit is very simple since it requires only the realization of the two holes in the facade and an electrical connection without the need for hydraulic connections: in fact, any condensation can simply be collected in a tray.

Even the maintenance (ordinary and extraordinary) of the appliance is very simple because it is carried out completely within the environment in which it is installed.

On Acquaclick you can find Innova air conditioners without external unit 2.0, available with different powers depending on the size of the room you need to cool.

Ask our experts for a quote for the air conditioning of your home via email at ordini@acquaclick.com